XL6009 DC-DC Boost Step Up Power Module with 7 Segment Display


product code: 000600000040



● With a voltmeter display, the voltmeter range 0 ~ 40V, error ± 0.1V;

● Touch the button (short press) to switch the measurement input or output voltage, and a light shows which voltage is being measured, set the content can be saved;

● The voltmeter can be turned off, long press the button switch for more than 1 second, you can turn off the voltmeter. If the voltmeter is closed, touch the button can open the voltmeter again;

● With power indicator, can indicate whether there is power input;

● With reverse connection protection, reverse connection will not damage the module;

● With short circuit / over-current / over-heat protection;

Module parameters:

Modular property: XL6009 DC-DC boost power module with voltage display;

Input voltage: limit value 3.5V – 32V, recommended value of 5.0V – 32V;

Output voltage: limit value 5.0V – 38V; output voltage continuously adjustable (clockwise rotation potentiometer voltage rise);

Input current: limit value 0–4A, recommended value 0 – 3A;

Conversion efficiency: maximum 95%;

Switching frequency: 150KHz, the second generation switching power supply technology;

Operating temperature: limit value -30 ℃ to +70 ℃, recommended value: -20 ℃ to +60 ℃;

Full load temperature rise: less than 40 ℃;

Output ripple: less than 200mV;

Short circuit protection: output current limit protection, self-recovery;

Reverse connection protection: input 40V anti-reverse connection protection;

Module Interface:

The input or output power can be connected through the connection terminal, which is convenient for users to use.

IN+: input positive

IN-: input negative

OUT+: Output positive

OUT-: Output negative

Module size:

Dimensions: 65 x 36 x 15mm (L x W x H)

Fixed screw hole: 3.0mm x 4, hole center distance from the edge of the board: 3.5mm



There are no reviews yet.

Be the first to review “XL6009 DC-DC Boost Step Up Power Module with 7 Segment Display”

Your email address will not be published. Required fields are marked *